Component Details

← Frequently Asked Questions (Appendix A)

Tips (Appendix C) →

↑ Back to Contents

The current User's Guide is very much a work in progress, any help would be greatly appreciated! If you'd like to contribute something, just hit the 'Edit' tab at the top.

Overview

These are all of the components that you can expect to utilize when designing in OpenRocket, although individual components will be shaded until available for use with other compatible components.

Component Details -- OpenRocket 15.02

Component Classes

The components available in OpenRocket are divided into four classes based upon component function. These classes are assembly components, external components, internal components, and mass components (which include recovery components).

List/table/whatever of all the available component types, parameters and any limitations of each.

Body components and fins set

Nose Cone	It is possible to choose from different Nose cone types.
Body tube	The carcass and the rocket itself. Possible to chose different materials and thicknesses that affect densities and therefore weights of rocket.
Transition
Launch lug
Fins Trapezoidal Eliptical Free form

Inner components

Inner tube	Inner tubes are usually used as motor mount.
Coupler	Tubes can be connected together using couplers. Couplers can also be used to make pistons.
Centering ring
Bulkhead
Engine block

Mass objects

Parachute
Shock cord
Streamer
Mass component

---

← Frequently Asked Questions (Appendix A)

Tips (Appendix C) →

↑ Back to Contents