Component database XML format - Revision history

Soupwizard at 08:53, 9 June 2013

2013-06-09T08:53:37Z

← Older revision		Revision as of 08:53, 9 June 2013
Line 89:		Line 89:
	: <Parachute>		: <Parachute>
	:: <Diameter Unit="m">0.6095999999999999</Diameter>		:: <Diameter Unit="m">0.6095999999999999</Diameter>
			:: <DragCoefficient>0.80</DragCoefficient>
	:: <Sides>8</Sides>		:: <Sides>8</Sides>
	:: <LineCount>8</LineCount>		:: <LineCount>8</LineCount>
	:: <LineLength Unit="m">0.7493</LineLength>		:: <LineLength Unit="m">0.7493</LineLength>
			:: <RadialDistance>1</RadialDistance>
			:: <RadialDirection>15</RadialDirection>
	: </Parachute>		: </Parachute>

			: <ShockCord>
			:: <Length Unit="cm"> </Length>
			: </ShockCord>

	: <Streamer>		: <Streamer>
			:: <DragCoefficient>0.80</DragCoefficient>
	:: <Length Unit="cm"> </Length>		:: <Length Unit="cm"> </Length>
	:: <Width Unit="cm'> </Width>		:: <Width Unit="cm'> </Width>
	:: <~~Thickness~~ Unit="m">~~5.08E-5~~</~~Thickness~~>		:: <Area Unit="cm^2"> </Area>
			:: <AspectRatio > </AspectRatio>
			:: <RadialDistance>1</RadialDistance>
			:: <RadialDirection>15</RadialDirection>
	: <Streamer>		: <Streamer>

Line 123:		Line 134:
	: </Transition>		: </Transition>

			</Components>

	Common data:		Common data:

Soupwizard at 08:44, 9 June 2013

2013-06-09T08:44:53Z

← Older revision		Revision as of 08:44, 9 June 2013
Line 36:		Line 36:
	:: <Material Type="BULK">{text} </Material> [should this be validated against material types listed higher up?]		:: <Material Type="BULK">{text} </Material> [should this be validated against material types listed higher up?]
	:: <Mass Unit="kg">0.035892</Mass>		:: <Mass Unit="kg">0.035892</Mass>
			:: <Finish> </Finish>
			:: <CG> </CG>
	: < /common to all components, inside each of those elements >		: < /common to all components, inside each of those elements >

Line 41:		Line 43:
	:: <InsideDiameter Unit="m">0.0657352</InsideDiameter>		:: <InsideDiameter Unit="m">0.0657352</InsideDiameter>
	:: <OutsideDiameter Unit="m">0.06604</OutsideDiameter>		:: <OutsideDiameter Unit="m">0.06604</OutsideDiameter>
			:: <WallThickness Unit="m">0.06604</WallThickness>
	:: <Length Unit="m">0.36195</Length>		:: <Length Unit="m">0.36195</Length>
	: </BodyTube>		: </BodyTube>

			: <BulkHead>
			:: <Filled>true</Filled> ?? nonfilled for baffle? or separate item for baffles? hollow plastic bulkheads?
			:: <OutsideDiameter Unit="m">0.028701999999999995</OutsideDiameter>
			:: <Length Unit="m">0.038099999999999995</Length>
			: </BulkHead>

			: <CenteringRing>
			:: <InsideDiameter Unit="m">0.0187452</InsideDiameter>
			:: <OutsideDiameter Unit="m">0.0240792</OutsideDiameter>
			:: <Thickness Unit="m">0.003175</Thickness>
			:: <Length Unit="m">0.00635</Length>
			: </CenteringRing>

	: <EngineBlock>		: <EngineBlock>
			:: <InsideDiameter Unit="m">0.013131799999999999</InsideDiameter>
			:: <OutsideDiameter Unit="m">0.017983199999999998</OutsideDiameter>
			:: <Thickness Unit="m">0.003175</Thickness>
			:: <Length Unit="m">0.003175</Length>
	: </EngineBlock>		: </EngineBlock>

Line 55:		Line 75:
	: <NoseCone>		: <NoseCone>
	:: <Shape>ELLIPSOID</Shape>		:: <Shape>ELLIPSOID</Shape>
			:: <ShapeParameter>1.0</ShapeParameter> (???)
			:: <Filled>true</Filled>
	:: <OutsideDiameter Unit="m">0.06604</OutsideDiameter>		:: <OutsideDiameter Unit="m">0.06604</OutsideDiameter>
			:: <BaseDiameter Unit="m">0.06604</BaseDiameter>
	:: <ShoulderDiameter Unit="m">0.064922</ShoulderDiameter>		:: <ShoulderDiameter Unit="m">0.064922</ShoulderDiameter>
	:: <ShoulderLength Unit="m">0.0381</ShoulderLength>		:: <ShoulderLength Unit="m">0.0381</ShoulderLength>
			:: <ShoulderThickness Unit="m">0.003175</ShoulderThickness>
			:: <EndCapped>true</EndCapped>
	:: <Length Unit="m">0.1016</Length>		:: <Length Unit="m">0.1016</Length>
	:: <Thickness Unit="m">0.003175</Thickness>		:: <Thickness Unit="m">0.003175</Thickness>
Line 72:		Line 97:
	:: <Length Unit="cm"> </Length>		:: <Length Unit="cm"> </Length>
	:: <Width Unit="cm'> </Width>		:: <Width Unit="cm'> </Width>
			:: <Thickness Unit="m">5.08E-5</Thickness>
	: <Streamer>		: <Streamer>

Line 77:		Line 103:
	:: <InsideDiameter Unit="m">0.0</InsideDiameter>		:: <InsideDiameter Unit="m">0.0</InsideDiameter>
	:: <OutsideDiameter Unit="m">0.017907</OutsideDiameter>		:: <OutsideDiameter Unit="m">0.017907</OutsideDiameter>
			:: <Thickness Unit="m">0.003175</Thickness> (wall thickness???)
	:: <Length Unit="m">0.019049999999999997</Length>		:: <Length Unit="m">0.019049999999999997</Length>
	: <TubeCoupler>		: <TubeCoupler>
Line 82:		Line 109:
	: <Transition>		: <Transition>
	:: <Shape>OGIVE</Shape>		:: <Shape>OGIVE</Shape>
			:: <Filled>true</Filled>
	:: <ForeOutsideDiameter Unit="m">0.067056</ForeOutsideDiameter>		:: <ForeOutsideDiameter Unit="m">0.067056</ForeOutsideDiameter>
	:: <ForeShoulderDiameter Unit="m">0.064973</ForeShoulderDiameter>		:: <ForeShoulderDiameter Unit="m">0.064973</ForeShoulderDiameter>
	:: <ForeShoulderLength Unit="m">0.0254</ForeShoulderLength>		:: <ForeShoulderLength Unit="m">0.0254</ForeShoulderLength>
			:: <ForeShoulderThickness Unit="m">0.003175</ForeShoulderThickness>
	:: <AftOutsideDiameter Unit="m">0.03175</AftOutsideDiameter>		:: <AftOutsideDiameter Unit="m">0.03175</AftOutsideDiameter>
	:: <AftShoulderDiameter Unit="m">0.0</AftShoulderDiameter>		:: <AftShoulderDiameter Unit="m">0.0</AftShoulderDiameter>
	:: <AftShoulderLength Unit="m">0.0</AftShoulderLength>		:: <AftShoulderLength Unit="m">0.0</AftShoulderLength>
			:: <AftShoulderThickness Unit="m">0.003175</AftShoulderThickness>
			:: does EndCapped make sense here? or ForeCapped?
	:: <Length Unit="m">0.1524</Length>		:: <Length Unit="m">0.1524</Length>
	:: <Thickness Unit="m">0.003175</Thickness>		:: <Thickness Unit="m">0.003175</Thickness> (wall thickness???)
	: </Transition>		: </Transition>

Soupwizard at 08:27, 9 June 2013

2013-06-09T08:27:19Z

← Older revision		Revision as of 08:27, 9 June 2013
Line 62:		Line 62:
	: </NoseCone>		: </NoseCone>

	Parachute		: <Parachute>
	Streamer		:: <Diameter Unit="m">0.6095999999999999</Diameter>
			:: <Sides>8</Sides>
			:: <LineCount>8</LineCount>
			:: <LineLength Unit="m">0.7493</LineLength>
			: </Parachute>

			: <Streamer>
			:: <Length Unit="cm"> </Length>
			:: <Width Unit="cm'> </Width>
			: <Streamer>

	: <TubeCoupler>		: <TubeCoupler>

Soupwizard at 08:23, 9 June 2013

2013-06-09T08:23:25Z

← Older revision		Revision as of 08:23, 9 June 2013
Line 31:		Line 31:

	: < common to all components, inside each of those elements >		: < common to all components, inside each of those elements >
	:: <Manufacturer>~~Estes~~</Manufacturer>		:: <Manufacturer> {text} </Manufacturer>
	:: <PartNumber>~~PNC-80FB~~</PartNumber>		:: <PartNumber> {text} </PartNumber>
	:: <Description>~~Estes PNC-80 Fat Boy profile cone~~</Description>		:: <Description> {text} </Description>
	:: <Material Type="BULK">~~Polystyrene PS~~</Material>		:: <Material Type="BULK">{text} </Material> [should this be validated against material types listed higher up?]
	:: <Mass Unit="kg">0.035892</Mass>		:: <Mass Unit="kg">0.035892</Mass>
	: < /common to all components, inside each of those elements >		: < /common to all components, inside each of those elements >

	<BodyTube>		: <BodyTube>
	~~EngineBlock~~		:: <InsideDiameter Unit="m">0.0657352</InsideDiameter>
	~~LaunchLug~~		:: <OutsideDiameter Unit="m">0.06604</OutsideDiameter>
			:: <Length Unit="m">0.36195</Length>
			: </BodyTube>

	<~~NoseCone~~>		: <EngineBlock>
			: </EngineBlock>

	<Shape>ELLIPSOID</Shape>		: <LaunchLug>
	<OutsideDiameter Unit="m">0.06604</OutsideDiameter>		:: <InsideDiameter Unit="m">0.0055626</InsideDiameter>
	<ShoulderDiameter Unit="m">0.064922</ShoulderDiameter>		:: <OutsideDiameter Unit="m">0.006096</OutsideDiameter>
	<ShoulderLength Unit="m">0.0381</ShoulderLength>		:: <Length Unit="m">0.0508</Length>
	<Length Unit="m">0.1016</Length>		: </LaunchLug>
	<Thickness Unit="m">0.003175</Thickness>
	</NoseCone?		: <NoseCone>
			:: <Shape>ELLIPSOID</Shape>
			:: <OutsideDiameter Unit="m">0.06604</OutsideDiameter>
			:: <ShoulderDiameter Unit="m">0.064922</ShoulderDiameter>
			:: <ShoulderLength Unit="m">0.0381</ShoulderLength>
			:: <Length Unit="m">0.1016</Length>
			:: <Thickness Unit="m">0.003175</Thickness>
			: </NoseCone>

	Parachute		Parachute
	Streamer		Streamer
	TubeCoupler
	<Transition>		: <TubeCoupler>
			:: <InsideDiameter Unit="m">0.0</InsideDiameter>
			:: <OutsideDiameter Unit="m">0.017907</OutsideDiameter>
			:: <Length Unit="m">0.019049999999999997</Length>
			: <TubeCoupler>

			: <Transition>
			:: <Shape>OGIVE</Shape>
			:: <ForeOutsideDiameter Unit="m">0.067056</ForeOutsideDiameter>
			:: <ForeShoulderDiameter Unit="m">0.064973</ForeShoulderDiameter>
			:: <ForeShoulderLength Unit="m">0.0254</ForeShoulderLength>
			:: <AftOutsideDiameter Unit="m">0.03175</AftOutsideDiameter>
			:: <AftShoulderDiameter Unit="m">0.0</AftShoulderDiameter>
			:: <AftShoulderLength Unit="m">0.0</AftShoulderLength>
			:: <Length Unit="m">0.1524</Length>
			:: <Thickness Unit="m">0.003175</Thickness>
			: </Transition>



	Common data:		Common data:

Soupwizard at 08:15, 9 June 2013

2013-06-09T08:15:40Z

← Older revision		Revision as of 08:15, 9 June 2013
Line 1:		Line 1:
	~~Ideas for the design~~ of an XML format for component ~~databases~~.		Design of an XML format for component database.

	~~Please clean this up, it's horribly messy..~~.		A serialized database of components is created by reading one or more XML files that contain components.

			<OpenRocketComponent> - base container element, surrounds everything

	~~<componentdatabase> - base container element, surrounds everything~~		(Manufacturers is not implemented in version 0.1)

			<Manufacturers> - list of manufacturers used in this database file
			: <Manufacturer id="mfgid"> - definition of a single manufacturer
			::: (id must be unique within this file, does not need to be globally unique)
			:: <DisplayName> - a short display/common name of the manufacturer
			:: <FullName> - the full name of the manufacturer
			:: <URL> - Manufacturer URL
			:: <LogoURL> - Link to Manufacturer's logo, must be of size xx by yy pixels.
			: <Manufacturer>
			<Manufacturers>

	<~~manufacturers~~> - list of ~~manufacturers~~ used in this database file		<Materials> - list of materials used in this database file
			: <Material UnitsOfMeasure="{text}">
			:: <Name lang=""> {text} </Name>
			:: <Density> {float} </Density>
			:: <Type> {BULK \| SURFACE \| LINE} </Type>
			: </Material>
			</Materials>

	~~<manufacturer id="mfgid"> - definition of a single manufacturer<br>~~		* Are materials really needed? For most components the total mass should be known, and the best way to use it is to compute the component density from the mass. This allows the user to modify the component (e.g. shorten a body tube) and the mass changes correspondingly.
	~~(id must~~ be ~~unique within this file~~, ~~does not need~~ to ~~be globally unique~~)

	~~<displayname> - a short display/common name of the manufacturer<br>~~
	~~<fullname> - the full name of the manufacturer<br>~~
	~~<url> - Manufacturer URL<br>~~
	~~<logo> - Manufacturer logo (? - maybe a bit problematic)~~

			<Components>

	<~~materials~~> - ~~list~~ of ~~materials used in this database file~~		: < common to all components, inside each of those elements >
			:: <Manufacturer>Estes</Manufacturer>
			:: <PartNumber>PNC-80FB</PartNumber>
			:: <Description>Estes PNC-80 Fat Boy profile cone</Description>
			:: <Material Type="BULK">Polystyrene PS</Material>
			:: <Mass Unit="kg">0.035892</Mass>
			: < /common to all components, inside each of those elements >

	<~~material id="matid"><br>~~		<BodyTube>
	~~<name lang=""><br~~>		EngineBlock
	~~<type>bulk\|surface\|line</type><br>~~		LaunchLug
	~~<density>~~

	* Are materials really needed? For most components the total mass should be known, and the best way to use it is to compute the component density from the mass. This allows the user to modify the component (e.g. shorten a body tube) and the mass changes correspondingly.		<NoseCone>

			<Shape>ELLIPSOID</Shape>
			<OutsideDiameter Unit="m">0.06604</OutsideDiameter>
			<ShoulderDiameter Unit="m">0.064922</ShoulderDiameter>
			<ShoulderLength Unit="m">0.0381</ShoulderLength>
			<Length Unit="m">0.1016</Length>
			<Thickness Unit="m">0.003175</Thickness>
			</NoseCone?

	<~~components~~>		Parachute
			Streamer
			TubeCoupler
			<Transition>

	~~<bodytube>~~
	Common data:		Common data:

Line 41:		Line 67:
	<diameter><br>		<diameter><br>
	<length><br>		<length><br>
	~~...~~
			</Components>

Sampo Niskanen: 1 revision: Import existing wiki English pages

2013-02-15T21:17:47Z

1 revision: Import existing wiki English pages

← Older revision	Revision as of 21:17, 15 February 2013
(No difference)

Plaa: initial component database format design

2011-08-17T19:20:30Z

initial component database format design

New page

Ideas for the design of an XML format for component databases.

Please clean this up, it's horribly messy...

<componentdatabase> - base container element, surrounds everything

<manufacturers> - list of manufacturers used in this database file

<manufacturer id="mfgid"> - definition of a single manufacturer 
(id must be unique within this file, does not need to be globally unique)

<displayname> - a short display/common name of the manufacturer 
<fullname> - the full name of the manufacturer 
<url> - Manufacturer URL 
<logo> - Manufacturer logo (? - maybe a bit problematic)

<materials> - list of materials used in this database file

<material id="matid"> 
<name lang=""> 
<type>bulk|surface|line</type> 
<density>

* Are materials really needed? For most components the total mass should be known, and the best way to use it is to compute the component density from the mass. This allows the user to modify the component (e.g. shorten a body tube) and the mass changes correspondingly.

<components>

<bodytube>
Common data:

<name> - short name of the part (? - is this necessary, or should it just be labeled by mfg and partno) 
<partno> - Part number / ID 
<description> - longer description of the part 
<manufacturer ref="mfgid"> 
<url> - URL related to the component (? - is this useful)

<diameter> 
<length> 
...